Published 18 Nov 2026 · Author: Ing. Marek Hlodák, PhD., Managing Director

Which marks must a genuine EUR pallet have?
A EUR/UIC pallet has the EUR-in-oval and UIC trademarks branded on its corner blocks. The middle block carries the production code and the IPPC heat-treatment mark. The marks must be legible and permanent – branded, not written with a marker or sprayed on.
| Where | What should be there | Example from our production |
|---|---|---|
| corner blocks | EUR-in-oval and UIC trademarks | EUR, UIC |
| middle block | production code: manufacturer, last digit of the year and month of production | A62-6-11 = November 2026 |
| middle block | IPPC mark: country code, registration number, treatment | SK-2142 HT |
How do I check dimensions and design?
- size 1200 × 800 mm and height 144 mm,
- 11 boards and 9 blocks in the specified layout,
- chamfered edges on the outer bottom boards for easier fork entry,
- weight of roughly 20–25 kg,
- nails driven flush, with no protruding heads or points.
What should I look for in the wood?
- no bark, rot or mould,
- no cracks in boards or blocks that reduce load capacity,
- reasonable moisture – wet wood is heavier and can go mouldy (we dry to 22 %),
- a new pallet is light-coloured, clean and shows no signs of use.
What does a fake or poor-quality EUR pallet look like?
Most often a mark is missing or illegible, the production code on the middle block is missing, or the dimensions or number of boards and blocks do not match the standard. A conspicuously low price is also a warning sign. The production code identifies the manufacturer; if in doubt, contact the pallet organisation that granted the licence – in Slovakia SŽK.
How do I recognise your pallet?
Our EUR pallets carry the production code A62 – for example A62-6-11 means November 2026 – and the IPPC mark SK-2142 HT. Every delivery comes with a heat-treatment protocol; the technical data sheet and certificates can be downloaded on our website.